Home   |   New Vehicles   |   Used Vehicles   |   Leasing   |   Photo Gallery   |   Parts/Accessories   |   Service   |   About Us   |   Locations   |   Contact Us

 


EZ GO Industrial 800E
 

Product Specification
 

 Motor:

Heavy Duty 36 volt DC series wound, brazed armature, solid copper windings Non vented 2.5 hp (1.9 kW) @ 2700 RPM (one hour)

Drive Train:

Direct motor shaft connected to transaxle pinion shaft

Transaxle:

Differential with helical gears, 14.78:1 ratio

Brakes:

Dual rear wheel mechanical self-adjusting drum brakes. Automatic park brakereleasewith self-compensating system

Electrical System.

36 volt DC, six, 6 volt, deep cycle storage batteries (115 minute minimum, 225 amp-hour
 @ 20 hr. discharge rate)

Speed Control:

Solid State Controller, 300 amp rated

Front Suspension:

Leaf springs with hydraulic shock absorbers

 Rear Suspension:

Leaf springs with hydraulic shock absorbers

 Steering:

Single reduction rack and pinion.

Speed:

13 mph ± 0.5 mph (21 kph ± 0.8 kph) Level ground

Weight:

675 lb (310 kg) (without batteries)

Length:

103 in (262 cm)

Width:

46.5 in (119 cm)

Height:

48.6 in (123 cm) (top of steering wheel)

Ground Clearance:

4.3 in (11 cm) (at differential)

Wheel Base:

65.5 in (166 cm)

Front Wheel Tread:

37 in (94 cm)

Rear Wheel Tread:

38.0 in (97 cm)

Turning Clearance Dia:

18.9 ft (5.72m)

Load Capacity:

800 lb (360 kg) including operator, passenger, accessories, and
cargo 600 lb (270 kg) max bed load.

Load Bed Size:

Inside Dimensions: 36 in long X 44 ˝ in wide X 11in high (Tailgate)
X 16 in high (Bulkhead) (91 X 113 X 28 X 41 cm)

Body Front:

Injection molded TPE (Thermoplastic Elastomer) Rear: Steel panels,
4 way embossed diamond pattern body

Color& Finish:

(Industrial Yellow) Base coat/clear coat finish

Cargo bed:

Roto-molded polyethylene. Bed raises without tools for power train access. Hinged, removable tailgate

Chassis:

Welded tubular steel with Durashield powder coat paint

Dash Panel:

4 position drink holders of glass fiber reinforced thermoplastic olefin

Operator Features:

Dash mounted key switch, reverse warning indicator, “deadman (operator presence switch)” accelerator control, integral handgrip on hip restraints, manual forward/reverse selector

Seating:

Vacuum formed fabric backed vinyl covers over cushion foam. Standard seating for operator and one passenger. (Black)

Steering Wheel:

13 in (33 cm) diameter with dual handgrips

 
 
 
Professional Golfcar Corporation
2370 W. Fullerton Pike
Bloomington, IN 47403
 
Phone: 800-742-4064     Fax: 812-825-9409