Home   |   New Vehicles   |   Used Vehicles   |   Leasing   |   Photo Gallery   |   Parts/Accessories   |   Service   |   About Us   |   Locations   |   Contact Us

 


Clays Car Utility Vehicle
 

Product Specification
 

Engine 11.0 hp (8.2 kW) rated, 4 cycle, 21 ci (350 cc) twin cylinder, air-cooled, by Robin
Valve Train Overhead valve, overhead cam, belt drive
Lubrication Pressurized oil system, washable permanent filter
Balancer Internal counter rotating balance shaft
Ignition Solid State with crank trigger, electronic timing advance, and RPM limiter
Carburetor Fixed jet float bowl with remote pulse fuel pump
Air Cleaner Replaceable dry cartridge with remote air intake

Electrical

Starter/Generator, solid-state regulator, 12-volt maintenance free battery, 425 CCA, 60 minute reserve
Drive Train Automatic, continuously variable transmission (CVT)
Transaxle  Differential with helical gears, 13.32:1 ratio, ground speed governor, forward/reverse
Brakes Dual rear wheel mechanical self-adjusting drum brakes. Automatic park brake release with self-compensating system
Front Suspension Leaf springs with hydraulic shock absorbers
Rear Suspension Leaf springs with hydraulic shock absorbers
Steering Self-compensating single reduction rack and pinion
Fuel System 6.0 gallon (22.8 L) tank
Speed 13 mph ± 0.5 mph (21 kph ± 0.8 kph) on level ground
Weight 930 lb (420 kg), dry; fuel capacity 31 lb (14 kg)
Length 107 in (272 cm) (Including rear footrest)
Width 46.5 in (118cm)
Height 49 in (124 cm) (at top of steering wheel)
Ground Clearance 6.0 in (15 cm) (at differential)
Wheel Base 65.5 in (166 cm)
Front Wheel Tread 38.5 in (98 cm)
Rear Wheel Tread 38.0 in (97 cm)
Turning Clearance Dia. 20.3 ft (7.1 m)
Load Capacity 800 lb (360 kg) including operator, passenger, accessories and cargo 250 lb (110 kg) max. cargo bed load
Cargo Bed Size 40 in wide, 32 in long (102 cm x 81cm)
Body Injection molded TPE (Thermoplastic Elastomer)
Body Protection Front fender flairs, tubular steel front bumper and brush guard
Color & Finish (Steel Blue Pearl) Base coat/clear coat
Chassis Welded tubular steel with Durashield TM powder coat paint
Dash Panel 4 position drink holders of glass fiber reinforced thermoplastic olefin
Power train Protection  Skid plate for engine and drive belt
Operator Features Dash mounted key switch, reverse warning indicator, “deadman (operator presence switch) accelerator control, integral handgrip on hip restraints, footrest with grab handle for rear seat passengers
Seating  Vacuum formed fabric backed vinyl covers over cushion foam. Standard seating for operator and three passengers
Convertible Rear Seat Rear seat converts to flatbed
Steering Wheel 13 in (33 cm) with dual handgrips
 
 
Professional Golfcar Corporation
2370 W. Fullerton Pike
Bloomington, IN 47403
 
Phone: 800-742-4064     Fax: 812-825-9409