Home   |   New Vehicles   |   Used Vehicles   |   Leasing   |   Photo Gallery   |   Parts/Accessories   |   Service   |   About Us   |   Locations   |   Contact Us

 


EZ  GO MPT 800G Gas



PRODUCT SPECIFICATIONS

Engine: 9.0 hp (6.7 kW) rated, 4 cycle, 18 ci (295 cc) twin cylinder, air-cooled, by Robin Subaru
Valve Train: Overhead valve, overhead cam, belt drive
Lubrication: Pressurized oil system, washable permanent filter
Balancer: Internal counter rotating balance shaft
Ignition: Solid State with crank trigger, electronic timing advance, and RPM limiter
Carburetor: Fixed jet float bowl with remote pulse fuel pump
Air Cleaner: Engine mounted integral air intake system with multi-phase silencer and cartridge filter element
Electrical: Starter/Generator, solid state regulator, 12 volt maintenance free battery, 425 CCA, 60 minute reserve
Drive Train: Automatic, continuously variable transmission (CVT)
Transaxle: Differential with helical gears,13.32:1 ratio, ground speed governor, forward/reverse
Brakes: Dual rear wheel mechanical self-adjusting drum brakes. Automatic park brake release with self-compensating system.
Front Suspension: Leaf springs with hydraulic shock absorbers
Rear Suspension: Leaf springs with hydraulic shock absorbers
Steering: Self-compensating single reduction rack and pinion
Fuel System: 6.0 gallon (22.8 L) tank
Speed: 13 mph ± 0.5 mph (21 kph ± 0.8 kph) on level ground
Weight: 780 lb (354 kg), dry, fuel capacity 31 lb (14 kg)
Length: 103 in (262 cm)
Width: 49 in (124 cm)
Height: 48.6 in (123 cm) (at top of steering wheel)
Ground Clearance: 4.75 in (12 cm) (at differential)
Wheel Base: 65.5 in (166 cm)
Front Wheel Tread: 37 in (94 cm)
Rear Wheel Tread: 38 in (97 cm)
Turning Clearance Dia: 18.9 ft (5.72m)
Load Capacity: 800 lb (360 kg) including operator, passenger, accessories and cargo, 500 lb max. bed load
Cargo Bed Size: Inside Dimensions: 30 ½ in long X 44 ½ in wide X 7 ½ in high (Tailgate) X 13 in high (Bulkhead) (77 X 112 X 19 X 33 cm)
Body Front: Injection molded TPE (Thermoplastic Elastomer)
Rear: Steel panels
Body Protection: Front fender flairs
Color & Finish: (Hunter Green) Base coat/clear coat finish
Cargo Bed: Roto-molded cross-linked polyethylene. Bed raises without tools for power train access. Hinged, removable tailgate
Chassis: Welded tubular steel with Durashield™ powder coat paint
Dash Panel: 4 position drink holders of glass fiber reinforced thermoplastic
Operator Features: Dash mounted key switch, reverse warning indicator, “deadman (operator presence switch)”accelerator control, integral handgrip on hip restraints, manual forward/reverse selector
Seating: Vacuum formed fabric backed vinyl covers over cushion foam. Standard seating for operator and one passenger
Steering Wheel: 13 in (33 cm) diameter with dual handgrips
 
 
Professional Golfcar Corporation
2370 W. Fullerton Pike
Bloomington, IN 47403
 
Phone: 800-742-4064     Fax: 812-825-9409